Using the Auria PowerPak
The Auria Huggie can be used to help stabilize the HiRes Auria Processor on the ear
while using the Auria PowerPak.
Preparing your Auria PowerPak for use with the Plug or Huggie
To attach the Auria PowerPak Plug or Huggie:
•
Gently push the Auria PowerPak plug or Huggie into open slot at the bottom of the
Auria PowerPak.
•
Place screw in top of the plug or Huggie
•
Using #2 or 1/8” flat blade screwdriver gently tighten the screw on top of the Auria
PowerPak adapter.
•
Follow directions for attaching Auria PowerPak to HiRes Auria Processor.
FIGURE 21: HiRes Auria Processor with Huggie
To remove the Auria PowerPak Plug:
•
Loosen the screw but do not remove
•
Gently push on the screw until the plug is loosened and easy to grasp
•
Remove the screw
•
Gently pull the plug out
To remove the Auria PowerPak Huggie:
•
Loosen the screw
•
Gently slide the Huggie out
NOTE:
When the HiRes Auria Processor with Auria PowerPak is not in use, be sure to
remove the battery from the Auria PowerPak otherwise, the battery will con-
tinue to drain.
AURIA
®
User Guide
19
Summary of Contents for HiRes
Page 1: ......
Page 7: ...6 AURIA User Guide...
