Auria Direct Connect Cable
This cable comes in 3 different lengths and is designed to connect to a variety of
assistive listening devices such as FM Systems, Infrared Systems, and CD Players.
These audio sources typically require a custom-made patch cable available either
from the manufacturer of these devices or from an electronics store. The cable has a
3.5mm stereo audio jack at one end and a custom miniature connector at the other
end that plugs into a connector on the top of the earhook. With or without the Direct
Connect Cable attached, the quick disconnect earhook mechanically functions as a
standard earhook, therefore you can attach an earmold with standard tubing to the
end of this earhook. When programmed appropriately the Auria Direct Connect
earhook can function as a standard earhook.
NOTE:
When using a mono source such as an FM System you must use a mono
to stereo adapter (included in the Auria Direct Connect Cable package).
FIGURE 9: Auria Direct Connect with mono to stereo adapter for FM use
To Connect Auria Direct Connect Cable:
•
Remove HiRes Auria Processor from ear
•
Hold the HiRes Auria Processor by the earhook
•
Gently push the Auria Direct Connect Cable into the port at the top of the earhook.
Below is an alternate method for attaching the Auria Direct Connect Cable to the
Auria Direct Connect Earhook:
•
Rotate the connector 180 degrees
•
Approach the Auria Direct Connect at an angle
•
Snap into place
•
Rotate the connector 180 degrees to align
To Disconnect the Auria Direct Connect Cable:
•
Remove the HiRes Auria Processor from ear
•
Hold the HiRes Auria Processor by the base of the earhook
•
Gently pull the Auria Direct Connect Cable from the port at the top of the earhook.
12
AURIA
®
User Guide
Summary of Contents for HiRes
Page 1: ......
Page 7: ...6 AURIA User Guide...
