CARE & SAFETY
Usage
It is normal for your monitor to “blink” the first time you use it. If this occurs
simply turn your monitor off, then on again. The effective screen pixels of your
monitor should read 99.99% or more, pixel or brightness loss should be less
than 0.01%. During normal usage your monitor should not have pixel residue.
However, when the same static picture is showed a long time before changing
the image, the previous image may remain, which is called “the shadow”. The
best way to avoid this “shadow” is when you are not operating your PC or
computer system, run monochrome or dynamic images as a screen saver, or
turn off monitor power 2 hours at every 12 hours. When the screen is black,
blinking, etc., Please contact the dealer or authorized service center to replace
related parts. Do not attempt to fix the monitor yourself.
Environments
Keep your monitor away from water sources, such as the bathroom,
dishwasher, kitchen, washing machine, swimming pools or humid basements.
Also avoid placing your monitor near direct heat such as heaters, hot air pipes
or under direct sunshine. Also avoid unstable surfaces or places with excess
dust or vibration. If your monitor is fixed on the wall or shelf, installation should
be confirmed by a professional installer. The long, narrow holes in the upper
and bottom part of the monitor back cover are for ventilation. These holes
must be kept clear at all times to prevent overheating.
27
