28
4.3 Install other Attachment-type Peripherals
Attachment-type peripherals, including YUNO-MSRLONG, YUNO-SCANNER2D,
YUNO-DALLAS and YUNO-ADDIMAT Reader, may be easily installed at either side of the
system. YUNO-MSRLONG is used as an installation representative for elaboration.
Make sure the unit is powered off before starting.
Please follow the below steps to finish the installation :
1. Unscrew the two pcs of screws from the selected side service door and remove its
cover.
2. Place the Peripheral Adapter and connect the peripheral with the connector of the
system. Locate this connection properly.
3. Insert the peripheral in place and fasten the two pcs of screws to make it secure.
*Apply the above procedures when installing the Attachment-type peripherals on
Touch Monitor series.
Summary of Contents for Yuno Series
