AURES Yuno Series, User Manual

Page: 30 / 92

25
BIT7: Reserved
BIT6:
Cash
Drawer “DIN bit0” pin input status.
= 1: the Cash Drawer closed or no Cash Drawer
= 0: the Cash Drawer opened
BIT5:
Reserved
BIT4: Reserved
BIT3:
Cash Drawer “DOUT bit1” pin output control.
= 1: Opening the Cash Drawer
= 0: Allow close the Cash Drawer
BIT2:
Cash Drawer “DOUT bit0” pin output control.
= 1: Opening the Cash Drawer
= 0: Allow close the Cash Drawer
BIT1: Reserved
BIT0: Reserved
Note: Please follow the Cash Drawer control signal design to control the Cash
Drawer.
Cash Drawer Control Command Example
Use Debug.EXE program under DOS or Windows98
Command Cash Drawer
O 48C 04 Opening
O 48C 00 Allow to close
 Set the I/O address 48Ch bit2 =1 for opening Cash Drawer by “DOUTbit0”
pin control.

Set the I/O address 48Ch bit2 = 0 for allow close Cash Drawer.
Command Cash Drawer
I 48C Check status

The I/O address 48Ch bit6 =1 mean the Cash Drawer is opened or not exist.

The I/O address 48Ch bit6 =0 mean the Cash Drawer is closed.