background image

iv

LEGISLATION AND WEEE SYMBOL

2002/96/EC Waste Electrical and Electronic Equipment Directive on the treatment, 

collection, recycling and disposal of electric and electronic devices and their 
components.

 

The crossed dust bin symbol on the device means that it should not be disposed of 
with other household wastes at the end of its working life. Instead, the device should 
be taken to the waste collection centers for activation of the treatment, collection, 
recycling and disposal procedure.
To prevent possible harm to the environment or human health from uncontrolled waste 
disposal, please separate this from other types of wastes and recycle it responsibly to 
promote the sustainable reuse of material resources.
 
Household users should contact either the retailer where they purchased this product, 
or their local government office, for details of where and how they can take this item for 
environmentally safe recycling.
 
Business users should contact their supplier and check the terms and conditions of 
the purchase contract.

This product should not be mixed with other commercial wastes for disposal.

Summary of Contents for W-TOUCH


































Reviews: