AURES Odysse II, User Manual

Page: 47 / 79

Appendix D: Customer Display Command Settings
The Customer Display is connected to serial port COM4
The default settings for the Customer Display are:
�
EPSON ESC/POS command set
�
9600 Baud, 8 bits, no parity, no flow control
Software Utility
A configuration utility is provided for the customer display on the driver CD.
(see Appendix C: Driver Installation for information about the driver CD)
Folder/File File Description
<CD>:\Common\CustomerDisplay\Windows Windows utility
<CD>:\Common\CustomerDisplay\DOS DOS utility
<CD>:\Common\CustomerDisplay\Linux Linux utility
A user manual for the utility is also available on the CD at the following location:
Folder/File File Description
<CD>:\Common\CustomerDisplay\ User manual
Software Status Setting Commands
When the system is powered on, it will read the EEPROM setting to set the Command
Type, Baud Rate, Parity, Data Length, Demo Mode setting and International Character
Set. The user can change the Software Status Setting Commands using the command
sequences described below: