background image

 

 

 

Some experts believe the incorrect or prolonged use of almost any product could 
cause serious injury or death. For information that may reduce your risk of serious 
injury or death, consult the points below and additionally, the information available at 
www.datastreamserver.com/safety 

  Consult all documentation, packaging and product 

labelling before use. Note that some products feature 
online documentation which should be printed and kept 
with the product. 

  Check product for loose / broken / damaged / missing 

parts, wear or leaks (if applicable) before each use. 
Never use a product with loose / broken / damaged / 
missing parts, wear or leaks (if applicable). 

  Products must be inspected and serviced (if applicable) 

by a qualified specialist every 6 months assuming 
average residential use by a person of average weight 
and strength, above average technical aptitude, on a 
property matching average metropolitan specification. 
Intended use outside these guidelines could indicate the 
product is not suitable for intended use or may require 
more regular inspection or servicing. 

  Ensure all possible users of the product have completed 

an industry recognized training course before being 
given access to the product. 

  The product has been supplied by a general merchandise retailer that 

may not be familiar with your specific application or your description of 
the application. Be sure to attain third-party approval for your 
application from a qualified specialist before use regardless of prior 
assurances by the retailer or its representatives. 

  This product is not intended for use where fail-safe operation is 

required. As with any product (take an automobile, aircraft, computer 
or ball point pen for example), there is always a small chance of 
technical issues that needs to be repaired or may require replacement 
of the product or a part. If the possibility of such failure and the 
associated time it takes to rectify could in any situation inconvenience 
the user, business or employee then the product is not suitable for 
your requirements. This product is not for use where incorrect 
operation or a failure of any kind, including but not limited to a 
condition requiring product return, replacement, service by a technician 
or replacement of parts could cause a financial loss, loss of employee 
time or an inconvenience requiring compensation. 

  If this item has been purchased in error after considering the points 

above, simply contact the retailer directly for details of their returns 
policy, if required. 

 

Summary of Contents for PRP-125












Reviews: