AURATON S03 RT, User Manual

Page: 9 / 24

9
Installation/replacement of batteries
The battery compartment can be found inside the controller, on the front
part of the enclosure. In order to install the batteries, take off the enclosure.
Put two 1.5 V AAA batteries inside the battery
compartment, paying attention to the polarity
of the batteries.
battery compartment
2 x AAA 1,5 V
batteries
Mounting the controller on a wall
In order to mount the controller on a wall:
1. Take off the enclosure of the controller.
2. Drill two 6 mm diameter holes in the wall.
3. Put two wall plugs in the drilled holes.
4. Fasten the back part of the enclosure to the wall
using the screws provided with the set.
5. Put on the controller’s enclosure.
If the wall is made of wood, there is no need to use wall plugs. Only 2.7 mm
diameter holes (instead of 6 mm) should be drilled and the screws should be
driven directly into the wood.
a hole for
the fastening screw