![AURATON S03 RT User Manual Download Page 13](http://html.mh-extra.com/html/auraton/s03-rt/s03-rt_user-manual_3017567013.webp)
13
Fastening the AURATON RT receiver to a wall
In order to fasten the AURATON RT receiver on a wall:
1. Take off the covers from the front part of the controller
(see chapter “Installation of the AURATON RT receiver).
2. Mark the location of the holes for the fastening screws on
the wall.
3. In the marked locations, drill holes with diameters appropriate for the
diameters of the enclosed wall plugs (5 mm).
4. Put the wall plugs in the drilled holes.
5. Fasten the AURATON RT receiver to the wall using screws so that the
receiver is well fastened.
Note:
If the wall is wooden, there is no need to use wall plugs.
In such a case, drill two holes 2.7 mm in diameter instead
of 5 mm, and screw the screws directly into the wood.
Summary of Contents for S03 RT
Page 1: ...S03 RT USER S MANUAL EN ...
Page 21: ...21 PROTECTIVE The AURATON S03 RT regulator connection schematics PUMP ...
Page 23: ......
Page 24: ...www auraton pl ver 20190411 ...