26/10/21, 4:32 μ.μ.
AURATON Libra SET - AURATON manuals
https://manuals.auraton.pl/manuals/auraton-libra-set-pl/
32/50
1. Remove the cover of the front part of the receiver,
see chapter "Installation of the
AURATON Fornax receiver - heating device controller (receiver)"
.
2. Mark the location of the fixing screw holes on the wall.
3. In the marked places, drill holes with the diameter of the plugs included in the kit
(5 mm).
4. Insert the wall plugs into the drilled holes.
5. Screw the AURATON Fornax receiver to the wall with screws so that they hold the
device well.
NOTE:
If the wall is wooden, there is no need to use wall plugs. Drill holes with a
diameter of 2.7 mm instead of 5 mm and screw the screws directly into the wood.
Introduction to programming
programming
Manual control
Anti-freeze temperature
Description of AURATON Fornax
Pairing AURATON Libra R of a weekly, wireless
temperature controller (transmitter) with AURATON
Fornax - a wireless controller for a heating or air-
conditioning device (receiver)
RESET AURATON Libra R
MASTER RESET AURATON Libra R
Configuration settings
PWM operating mode
Special situations
Unique features of AURATON Fornax
Additional remarks
Connection diagram of AURATON Fornax
Cleaning and maintenance
Technical data
Disposal of the device
To download
Weekly, wireless temperature controller with
AURATON Fornax heating or air conditioning
controller (set)
The description of AURATON Libra R
The first launch of AURATON Libra R.
