26/10/21, 1:37 μ.μ.
AURATON Auriga - AURATON manuals
11/23
NOTE:
After replacing the battery and assembling the housing, we recommend
pressing the button twice in order to stabilize the relay operation.
Mounting AURATON Auriga - a daily, wired
temperature controller
To fix the AURATON Auriga controller to the wall:
1. Remove the cover
(as shown in the section "Connecting the cables to the AURATON
Auriga").
2. Drill two holes 6 mm in diameter in the wall
(mark the spacing between the holes
using the back part of the controller housing).
3. Put the wall plugs in the drilled holes.
4. Screw the rear part of the controller housing to the wall using the screws included in
the kit.
5. Put the regulator housing back on.
NOTE:
In the case of a wooden wall, there is no need to use expansion bolts. It is
enough to drill holes with a diameter of 2.7 mm (instead of 6 mm) and screw
the screws directly into the wood.