20
21
Starting the controller for the first time
After correct installation of the
batteries, the LCD will display, for
a second, all segments followed by the
firmware version number.
After a while, the controller will
automatically switch to time setting
mode. A blinking component on the
display is in edit mode. Turn the knob
clockwise or counter clockwise to set
the hour desired and confirm with the
key.
Turn the knob clockwise or counter
clockwise to set the correct value for
minutes and, again confirm setting
with the
key.
In the top left corner a blinking day
symbol will appear. Turn the knob
clockwise or counter clockwise to set
the day desired and confirm with the
key .
<OK
<OK.
NOTE
:
If no key is pressed for 60 seconds in the initial edit mode,
the default time 12:00 and Monday will be automatically
set.
NOTE
:
While programming any other functions, if no key is
pressed for 10 seconds, this will be interpreted as pressing
the
key.
<OK
Setting the clock and day of week
To set the clock:
1
. Press the
A segment with time will start
blinking on the display.
2
. Turn the knob clockwise or counter
clockwise to set the hour desired
and confirm with the
key.
3
. Turn the knob clockwise or counter
clockwise to set the correct value
for minutes and again confirm with
the
key.
<zeg
OK...
OK..
key.
