12
CAUTION
13
To fix the
AURATON 3021
controller to the wall:
1.
Remove the enclosure
(as described in the "Wiring your
AURATON 3021" section).
2.
Drill 2 holes diameter 6 mm
in the wall
(use the back of
the controller enclosure to set
the right spacing of the
holes)
.
Fixing the controller to the wall
NO
COM
NC
hole for a mounting
screw
hole for
a mounting
screw
3.
Place plastic plugs in the drilled holes.
4.
Screw the back of the controller enclosure to the wall with the
two screws provided.
5.
Replace the controller enclosure.
NOTE
: No expansion bolts are needed for wooden walls. Just drill holes
diameter 2.7 mm (instead of 6 mm) and screw the screws directly into
the wood.
Replacing the enclosure 3021
While replacing the front part of the enclosure on the back one, pay
attention to the pin connector that controls the relay.
While reassembling ensure that the pins engage with the pin
connector socket.
Pins
Pin
connector
socket
FRONT
ENCLOSURE
BACK
COVER