5. Turning on
AURATON 2005 TX RX
Plus
for the first time
1. Insert new ALKALINE batteries in
AURATON
2005 TX Plus
2. Plug in
AURATON 2005 RX Plus
and wait 10
minutes to achive full range by transmitter
3. Yellow LED indicates that transmitter is within
receivers range . LED blinks once a minute.
The transmitter is out of range (or batteries of
AURATON 2005 TX Plus
are low) if LED blinks
every second or does not blink. The factory set
communication code is „085”. If there are
troubles with communication code can be
changed – see chapter no. 6.
4. Red LED indicates that receiver
AURATON
2005 RX Plus
is supplied with 230VAC.
5. Green LED indicates that heating device is on.
AURATON 2005 TX RX Plus
- Turning on for the first time
40
1.
Antenna for communication with
AURATON
2005 TX Plus
.
2.
green LED – indicates operating status of
heating device
red LED – indicates power supply status of
AURATON 2005 RX Plus
yellow LED – indicates communication
status with
AURATON 2005 TX Plus
3.
Additional electric socket switch
4.
Additional electric socket – can be used to
supply any 230VAC device (MAX.5A).
5.
Plastic connectors cover
6.
230VAC plug
EN
