Rev. A 05/26
AM11MF30-1
5
E-1
2. Mount the fan blade to the fan motor (E-2). Make
sure the fan blade set screw is on the flat section of
the fan motor shaft. Complete the fan assembly by
removing the small screw and nut, and mounting the
front guard and tighten all the hinges around outer
rims of the fan guard (E-3, E-4).
E-2
E-3
3. Place the small screw and nut at the bottom hole to
secure the forward and rear guards (E-4).
E-4
4. Connect nozzle housing by gently pushing the
attachment legs on the front guard wire (E-5)
E-5
AIR, WATER AND ELECTRICAL
CONNECTIONS
1. Connect the air and water tubes to the connectors on
the Mist Control / Fan Pole Assembly. The water is
the smaller tube. Make sure the tube is pushed all
the way into the connector, then make the electrical
connection (F-1)
F-1
