Rev. A 05/26
AM11MF30-1
7
To turn the system back on, turn the misting switch
off, fill the water tank (DRINKING WATER ONLY),
then follow the priming instructions above.
ADJUSTING MIST DENSITY
To optimize the cooling effectiveness of the system,
you can:
• Operate the unit with a DRY or WET mist, based on
your needs.
• To increase the mist density, turn the mist control
valve counterclockwise.
• To decrease the mist density, turn the mist control
valve clockwise.
When the misting fan is turned “OFF”, the air-pump
continues to work for approximately 2 to 4 minutes.
This allows the air-pump to clear the remaining water
from the nozzle hoses to prevent accumulation of
deposits and reduce the risk of clogging.
5. Operating Tips
Use DRINKING WATER only in the system. For dry
climates, increasing the water flow will provide
maximum cooling results. In humid climates, a
reduced water flow is recommended.
MAINTENANCE
WARNING:
ALLWAYS UNPLUG THE POWER
CORD BEFORE MOVING OR SERVICING
WARNING:
DO NOT IMMERSE THE MISTING
FAN IN WATER!
CUSTOMER RESPONSIBILITIES
Read and follow the maintenance schedule and the
maintenance procedures listed in this section.
EMPTYING WATER TANK
•
Place misting fan on surface safe for to be water
drained.
•
Remove drain plug by turning counterclockwise.
•
Allow tank to drain completely.
•
Replace drain plug and hand tighten turning
clockwise.
CLEANING BASKET FILTER
•
Remove fill cap and remove basket filter.
•
Rinse debris from filter with running water.
•
Replace basket filter and fill cap.
CONDITIONING WATER TANK
Conditioning the water tank ensures that the cooling
system will operate at optimal levels throughout the life
of the system. It is suggested that the tank be
conditioned at an interval of every 4th filling or
once/month; whichever comes first.
•
Completely drain water tank. (See Emptying Water
Tank)
•
Fill tank with DRINKING WATER. Be sure to always
fill tank with basket filter in place.
•
Add
½
teaspoon of unscented chlorine bleach to the
water tank (approximately 5 drops per gallon of
drinking water).
•
Replace cap and hand tighten.
•
Run system for 5 minutes with a WET mist.
•
The system is conditioned and ready for operation.
REPLACING FILTERS
The filters have been designed to provide optimal
system performance by catching any debris that may
enter the supply lines throughout use. Semi annual
replacement of both the air and water filters ensures the
life of your system. Call 1-800-320-6478
•
Remove the ventilation grill and locate the air and
water filters (J-1, J-2).
J-1
J-2
•
The filters are connected to the system via “Push-In”
connectors for ease of service. Push the connector and
pull the hose (J-3).
J-3
•
Dispose of filter.
CAUTION:
IMPROPER PLACEMENT OF
THE FILTER CAN DEGRADE SYSTEM
PERFORMANCE.
•
Remove filter from package and orient the directional
arrow so that the flow direction is towards the left J-4.
Air Filter
Push-In
Connector
Water Filter
