Once the scan is complete, the radio shows a list of available stations.
To remove stations that are listed but not unavailable, choose Prune invalid.
Turn the navigatereel to view a list of stations and press to select. Once selected, the station plays and
the screen shows information about station, track or show as broadcast.
5.6.2 Presets
To store a DAB preset, press and hold
PRESET
until the display shows the Save preset screen. Select one
of the 10 presets to save the currently playing station.
To select a preset, press
PRESET
briefly, then select one of the listed preset stations. When a preset
station is playing, it shows Pn (P1, P2 etc) at the bottom right of the screen.
P1
to
P10
on the remote control are for the use ofpreset station 1-10.
5.6.3 Now playing information
While the stream is playing, the screen shows its name and DLS (Dynamic Label Segment) information
broadcast by the station giving real-time information such as programme name, track title and contact
details. Stereo broadcasts are indicated with an icon at the top of the screen. To view further information,
press
INFO
.
Each time you press
INFO
, another set of information is displayed, cycling through DLS text, programme
type, ensemble name/frequency, signal strength/error rate, bite rate/codec/channels and today’s date.
5.6.4 Settings
• Dynamic range compression (DRC)
If you are listening to music witha high dynamic range in a noisy environment, you may wish to compress
the audio dynamic range. This makes quiet sounds louder, and loud sounds quieter. You can change DRC
as off, low or high.
• Station order
You can choose the order of the DAB station list to be either Alphanumeric, Ensemble or Valid.
Ensemble lists groups of stations that are broadcast together on the same ensemble. Valid lists valid
stations first, alphanumerically, then off-air stations.
5.7 FM
FM radio mode receives analogue radio from the FM band and displays RDS (Radio Data System) infor-
mation about the station and where broadcast.
To find a station, press
SELECT
. The frequency display starts to run up as unit scans the FM band. Al-
ternatively, you can scan up or down by pressing and holding the buttons or or tune manually with
quick presses, or by turning the navigatereel.
5.7.1Preset
To store a FMpreset, press and hold
PRESET
until the display shows the Save preset screen. Select one
of the 10 presets to save the currently playing station.
37
