manualshive.com logo in svg

auna 10029400, Manual, Page: 18 / 56

Share
Download
auna 10029400 Manual Download Page 18

   

18

holding bracket

charging cable

Insert the microphone plug into mic jack 1 or 2 .

Charging external device by built-in 5V USB port

It can charge various external devices, e .g . ipod, iphone, ipad, smart phone or tablet etc .

6

It can charge various external devices, e.g. ipod, iphone, ipad, smart phone 

or tablet etc.   

 

CHARGING EXTERNA

CONNECTING THE MICROPHONE

L DEVICE BY 

BUILT-IN DC 5V USB PORT

 

 

Note :

- When it has been connected, it will 

   automatically charge any of the device. 

- There is no control key to select either 

   "charge" or "not charge". Please 

   disconnect charging if you don't need 

   it or leave it for long time.

   Insert the microphone 

   plug into mic jack 

   1 or 2.

1/. Take out the holding bracket 

     from the package.

 

holding bracket

2/. Insert it into the position as 

     shown.

 

 
3/. Place any of device that you 

     need to charge over the slot.

 

 

4/. Plug in charging cable 

(not supplied) 

     to both external device's DC jack 

     and tower speaker USB port.   

 

      

charging cable

6

It can charge various external devices, e.g. ipod, iphone, ipad, smart phone 

or tablet etc.   

 

CHARGING EXTERNA

CONNECTING THE MICROPHONE

L DEVICE BY 

BUILT-IN DC 5V USB PORT

 

 

Note :

- When it has been connected, it will 

   automatically charge any of the device. 

- There is no control key to select either 

   "charge" or "not charge". Please 

   disconnect charging if you don't need 

   it or leave it for long time.

   Insert the microphone 

   plug into mic jack 

   1 or 2.

1/. Take out the holding bracket 

     from the package.

 

holding bracket

2/. Insert it into the position as 

     shown.

 

 
3/. Place any of device that you 

     need to charge over the slot.

 

 

4/. Plug in charging cable 

(not supplied) 

     to both external device's DC jack 

     and tower speaker USB port.   

 

      

charging cable

6

It can charge various external devices, e.g. ipod, iphone, ipad, smart phone 

or tablet etc.   

 

CHARGING EXTERNA

CONNECTING THE MICROPHONE

L DEVICE BY 

BUILT-IN DC 5V USB PORT

 

 

Note :

- When it has been connected, it will 

   automatically charge any of the device. 

- There is no control key to select either 

   "charge" or "not charge". Please 

   disconnect charging if you don't need 

   it or leave it for long time.

   Insert the microphone 

   plug into mic jack 

   1 or 2.

1/. Take out the holding bracket 

     from the package.

 

holding bracket

2/. Insert it into the position as 

     shown.

 

 
3/. Place any of device that you 

     need to charge over the slot.

 

 

4/. Plug in charging cable 

(not supplied) 

     to both external device's DC jack 

     and tower speaker USB port.   

 

      

charging cable

6

It can charge various external devices, e.g. ipod, iphone, ipad, smart phone 

or tablet etc.   

 

CHARGING EXTERNA

CONNECTING THE MICROPHONE

L DEVICE BY 

BUILT-IN DC 5V USB PORT

 

 

Note :

- When it has been connected, it will 

   automatically charge any of the device. 

- There is no control key to select either 

   "charge" or "not charge". Please 

   disconnect charging if you don't need 

   it or leave it for long time.

   Insert the microphone 

   plug into mic jack 

   1 or 2.

1/. Take out the holding bracket 

     from the package.

 

holding bracket

2/. Insert it into the position as 

     shown.

 

 
3/. Place any of device that you 

     need to charge over the slot.

 

 

4/. Plug in charging cable 

(not supplied) 

     to both external device's DC jack 

     and tower speaker USB port.   

 

      

charging cable

6

It can charge various external devices, e.g. ipod, iphone, ipad, smart phone 

or tablet etc.   

 

CHARGING EXTERNA

CONNECTING THE MICROPHONE

L DEVICE BY 

BUILT-IN DC 5V USB PORT

 

 

Note :

- When it has been connected, it will 

   automatically charge any of the device. 

- There is no control key to select either 

   "charge" or "not charge". Please 

   disconnect charging if you don't need 

   it or leave it for long time.

   Insert the microphone 

   plug into mic jack 

   1 or 2.

1/. Take out the holding bracket 

     from the package.

 

holding bracket

2/. Insert it into the position as 

     shown.

 

 
3/. Place any of device that you 

     need to charge over the slot.

 

 

4/. Plug in charging cable 

(not supplied) 

     to both external device's DC jack 

     and tower speaker USB port.   

 

      

charging cable

1 .  Take out the holding 

bracket from the 

package .

2 .  Insert it into the position as shown .

3 . 

Place any device that 

you need to charge 

over the slot .

4 .  Plug in charging cable (not supplied) 

to both external device’s DC jack and 

tower speaker USB port .

Note

• 

When it has been connected, it will automatically charge any of the device.

• 

There is no control key to select either „charge“ or „not charge“. Please disconnect charging if you 

don‘t need it or leave it for long time .

Connecting the microphone

Summary of Contents for 10029400

























































Reviews:

No comments