manualshive.com logo in svg

AUMA SAI 07.2, Operation Instructions Manual, Page: 24 / 52

Share
Download
AUMA SAI 07.2 Operation Instructions Manual Download Page 24

5.3.

Accessories for electrical connection

5.3.1.

Parking frame

Figure 19: Parking frame, example with SH plug/socket connector and cover

Application

Parking frame for safe storage of a disconnected plug or cover.

For protection against touching the bare contacts and against environmental
influences.

5.3.2.

External earth connection

Figure 20: Earth connection for multi-turn actuator

Application

External earth connection (U-bracket) for connection to equipotential compensation.

Table 9:

Terminal cross sections and earth connection tightening torques

Tightening torques

Terminal cross sections

Conductor type

3 – 4 Nm

2.5 mm² to 6 mm²

Solid wire and stranded

3 – 4 Nm

1.5 mm² to 4 mm²

Fine stranded

For fine stranded (flexible) wires, connection is made via cable lugs/ring terminals. When connecting
two individual wires with a U-bracket, cross sections have to be identical.

24

 SAI 07.2 – SAI 16.2 / SARI 07.2 – SARI 16.2

Electrical connection

 for use in nuclear power plants

Summary of Contents for SAI 07.2





















































Reviews:

No comments