manualshive.com logo in svg

AUMA SAE 07.2 Series, Operation, Assembly And Commissioning Instructions, Page: 102 / 116

Share
Download
AUMA SAE 07.2 Series Operation, Assembly And Commissioning Instructions Download Page 102

Service conditions

IP68
Terminal compartment additionally sealed against interior of actuator controls (double sealed)

Enclosure protection according to
EN 60529

According to AUMA definition, enclosure protection IP68 meets the following requirements:

●

Depth of water: Maximum 8 m head of water

●

Duration of continuous immersion in water: Maximum 96 hours

●

Up to 10 operations during continuous immersion

●

Modulating duty is not possible during continuous immersion.

For exact version, refer to actuator controls name plate.

Pollution degree 4 (when closed), pollution degree 2 (internal)

Pollution degree according to IEC
60664-1

1 g, from 10 Hz to 200 Hz
Resistant to vibration during start-up or for failures of the plant. However, a fatigue strength may not be
derived from this. (Not valid in combination with gearboxes)

Vibration resistance according to
IEC 60068-2-6

Suitable for use in areas with high salinity, almost permanent condensation, and
high pollution.

KS

Standard:

Corrosion protection

Suitable for use in areas with extremely high salinity, permanent condensation,
and high pollution.

KX

Option:

Double layer powder coating
Two-component iron-mica combination

Coating

AUMA silver-grey (similar to RAL 7037)

Standard:

Colour

Available colours on request

Option:

Accessories

For actuator controls mounted separately from the actuator, including plug/socket connector.
Connecting cable on request.
Recommended for high ambient temperatures, difficult access, or in case of heavy vibration during
service.
Cable length between actuator and actuator controls is max. 100 m. An MWG is required for position
feedback.

Wall bracket

AUMA CDT (Commissioning and Diagnostic Tool for Windows-based PC)
AUMA Assistant App (Commissioning and Diagnostic Tool for Android devices)

Programming software

Further information

Approx. 12 kg (including Ex-plug/socket connector with screw-type terminals)

Weight

ATEX Directive: (2014/34/EU)
Electromagnetic Compatibility (EMC): (2014/30/EU)
Low Voltage Directive: (2014/35/EU)
Machinery Directive: (2006/42/EC)

Directives

14.3.

Tightening torques for screws

Table 46:

Tightening torques for screws

Tightening torque [Nm]

Threads

Strength class

A2-80/A4-80

A2-70/A4-70

10

7.4

M6

24

18

M8

48

36

M10

82

61

M12

200

150

M16

392

294

M20

1,057

1,015

M30

2,121

1,769

M36

102

SAEx 07.2 – SAEx 16.2/SAREx 07.2 – SAREx 16.2 Control unit - electromechanical

Technical data

ACExC 01.2 Intrusive Modbus RTU

Summary of Contents for SAE 07.2 Series





















































































































Reviews:

No comments