6.2.
Motor operation
✔
Perform all commissioning settings and the test run prior to motor operation.
6.2.1.
Local operation
The local operation of the actuator is performed using the push buttons of the local
controls.
Figure 25: Local controls
[1]
Push button for operation command in direction OPEN
[2]
Push button Stop
[3]
Push button for operation command in direction CLOSE
[4]
Selector switch
Hot surfaces, e.g. possibly caused by high ambient temperatures or strong
direct sunlight!
Danger of burns
→
Check surface temperature and wear protective gloves, if required.
→
Set selector switch [4] to position Local control (LOCAL).
➥
The actuator can now be operated using the push buttons [1 – 3]:
-
Run actuator in direction OPEN: Press push button [1]
.
-
Stop actuator: Press push button [2] Stop.
-
Run actuator in direction CLOSE: Press push button [3]
.
6.2.2.
Actuator operation from remote
→
Set selector switch to Remote control (REMOTE).
➥
Now, it is possible to operate the actuator via remote control, via operation
commands (OPEN, STOP, CLOSE) or analogue setpoints (e.g. 0 – 20 mA).
30
SA 07.2 – SA 16.2 / SAR 07.2 – SAR 16.2
Operation
SEM 01.1/SEM 02.1
