2
•
Place actuator on the valve/gearbox and use bolts with a minimum quality of 8.8 to fasten. Tighten
diagonally.
4. MANUAL OPERATION
Engaging Handwheel
(
Figure B
)
CAUTION:
Manual operation should not be engaged if motor is running.
•
Lift declutch lever in center of handwheel to fully extended position while slightly turning the
handwheel.
•
Release declutch lever, it must snap back to its original position; manual mode remains engaged.
Manual Operation
• WARNING •
DECLUTCH LEVER MUST BE FULLY RELEASED AND RETURNED TO UNENGAGED POSITION
(90°)
WHILE IN MANUAL HANDWHEEL OPERATION TO PREVENT PHYSICAL DAMAGE
.
•
If power tools are used, the permissible speed is 300 rpm.
•
For two-inch nut or chainwheel operation refer to separate instructions.
Disengaging Manual Operation
•
Manual drive disengages automatically when motor is started.
5. ELECTRICAL CONNECTIONS
CAUTION:
Observe safety regulations. Check whether the power supply (voltage, phase and
frequency) complies with the motor nameplate.
Terminal Access
•
Take off the terminal compartment cover.
•
Loosen cheese head screws inside the cover and remove multi socket carrier.
