38
The advanced digital circuitry within the Oximeter Box of this system
requires no calibration or periodic maintenance, neither does the
Display Unit .
Field service or repair of this system is not possible. Do not attempt to
open the case. Opening the Oximeter Box and the Display Unit will
damage the device and void the warranty. If the system is not
functioning properly, see “Troubleshooting” section on page 39 for
more information.
The expected service life of Aulisa GA1000 Monitoring System is
18 months.
Clean surface of and disinfect the sensor cable before each use.
For surface cleaning and disinfection, follow the recommended actions
below.
Clean the surface of the sensor cable with a soft
Surface cleaning:
cloth dampened with rubbing alcohol. Lightly wipe the surface of the
device.
Disinfection:
Use a soft cloth saturated with a solution of 10% chlorine
bleach in tap water, lightly wiping the surface .
Do not pour or spray any liquids onto components, and do not allow any
liquids to enter any openings in the device. Allow the unit to dry
thoroughly before reuse.
Do not immerse the device in liquid, and do not use caustic or abrasive
cleaning agents on the device.
