Auerswald COMtrexx Business, Instructions Manual

Page: 34 / 75

First Setup
34
COMtrexx Business - FW 1.4 - Instructions V02 06/2021
Since the PBX forces an HTTPS connection, your browser will provide a safety warning
(because of the missing safety certificate).
2. If necessary, transmit the safety certificate to your working environment (user and
browser profile).
3. Enter username and password. They are both admin in the factory settings.
Warning: Passwords that are unchanged from the factory settings are a security risk.
During login, the device forces the user to enter a new password with high security
level.
4. If required, change the user name under Admin user name (recommended).
5. Enter an admin PIN under Administrator access and repeat it.
Note: The Admin PIN must be numeric and consist of 6 digits. A valid PIN is required
for going on to the next step.
6. Click to confirm the entries.
7. Click on Initialization .
8. Click on Copy to copy the initialization code.
9. Click on License server , in order to open it in the browser.
10. Register.
11. Click on
create new device in the upper right.
12. Enter a name for your PBX under Description .
13. Paste the copied initialization code under COMtrexx Init File .
14. Click on
Create
.
15. Click on the clipboard on the right side under Certificate for copying the certificate.
16. Paste the answer of the licence server in the empty entry field and click on Initialize .
17. Click on Copy to copy the serial number.
18. Click on Open shop .
19. At the end of the page click on
Exchange vouchers
under
Shop service
.
20. Click on Voucher center .
21. Open Device in the menu bar and click on Info .
22. Paste the serial number of your device and confirm by pressing enter.
23. Click on
Display License .
24. Copy the complete code into the empty field
Activating system
.
25. Click on activate .
26. Confirm the note by clicking on Next .
27. Click on License page . The web interface now opens.
28. On the following pages you can make the settings for Server configuration , DNS
configuration
and
HTTP proxy configuration
.
Save
your entries.
The IP address is transferred over when the PBX is restarted. You may need to change
the PC’s network settings so that the PBX can be accessed via the new IP address.
Note: After rerouting, you need to log in again.