Auerswald COMfortel M-520 Advanced Information Download Page 28

Page: 28 / 55

COMfortel M-520 - Advanced Information V01 08/2019

Sound profiles

The telephone has 3 sound profiles for adapting the handset to the environmental conditions:

Profile Loud, Profile Silent, Profile Personal

Use

to switch between the profiles

. . . the profile is changed straight away without a

prompt

The profiles are set as follows by default:

Activate alert tone for an incoming call for

Profile Silent

: after switching to

Profile Silent

press

the display key

Beep

. . . the following icon appears in the status bar

Default setting

Profile Loud

Profile Silent

Profile

Personal

Silent alert (

p. 41)

Same as

Profile

Personal

Off

Ringtone (

p. 40)

Off

Ringtone volume (

p. 40) Internal

Off

External

Off

Handset volume (

p. 39)

Receiver

Handsfree mode

Advisory tones (

p. 41)

Key click

Yes

Confirmation
tone

Yes

Battery tone

Yes

Changes to the settings listed in the table:

•

apply in the

Loud

and

Silent

profiles as long as the profile is not changed.

•

are permanently saved in the

Profile Personal

for this profile.

The set profile remains set when switching the handset off and back on.

Summary of Contents for COMfortel M-520
























































Search results

Summary of Contents for COMfortel M-520

Reviews:

Related manuals for COMfortel M-520

Brands by name

Popular brands

Auerswald COMfortel M-520, Advanced Information

Search results

Summary of Contents for COMfortel M-520

Reviews:

Related manuals for COMfortel M-520

Brands by name

Popular brands