Activating/deactivating Auto Answer
COMfortel M-520 - Advanced Information V01 08/2019
39
Keypad illumination
You can set the brightness of keypad illumination in 5 increments.
¤
. . . use
to select
Settings
OK
Display & Keypad
OK
Key
Illumination
OK
. . . use
to select
Brightness
(1 - 5)
Save
Activating/deactivating automatic keypad lock
Automatically lock the keypad when the handset has been in idle status for around 15 seconds.
¤
. . . use
to select
Settings
OK
Display & Keypad
OK
Auto
Keypadlock
Change
(
= on)
Keypad lock with PIN protection:
Set the handset PIN (
Activating/deactivating Auto Answer
When set to Auto Answer, the handset accepts an incoming call as soon as it is removed from the
charging cradle.
¤
. . . use
to select
Settings
OK
Telephony
OK
Auto Answer
Change (
= on)
Regardless of the
Auto Answer
setting, the connection ends as soon as you place the handset
back in the charging cradle. Exception: Press and hold the handsfree key
for a further
2 seconds while placing the handset in the charging cradle.
Changing the earpiece and speaker volume
You can set the volume of the earpiece and speaker at 5 levels independently of each other.
During a conversation
¤
Handset Volume
. . . use
to select volume
Save
. . . the setting is saved
¤
In Charger
: . . . use
to select
On
or
Off
Backlight when not in the charging cradle:
¤
Out of Charger
. . . use
to select
On
or
Off
Save selection:
¤
Save
The handset's standby time may be significantly reduced if the display backlight is acti-
vated.
If a call is indicated on the handset, the keypad automatically unlocks and you can
accept the call. It then locks again when the call is finished.
It is not possible to call emergency numbers either when keypad lock is activated.
