Subject to alterations
or errors
• When the work is done, plug the keypad back on, and place the keypad insert
back on the lower part of the device.
Make sure the seal is correctly positioned and in perfect working order. Then tighten the
fastening screws in a diagonal pattern.
– Only blind plugs and cable glands as prescribed by the manufacturer may be used.
Should these points not be observed, the explosion protection of the device cannot be
guaranteed. The device then poses a potential threat to the user’s life and can cause the
ignition of an explosive atmosphere.
CE symbol
We hereby declare this product is in compliance with the Essential Health and Safety
Requirements of
ATEX Directive 201 4/34/EU,
EMC Directive 201 4/30/EU,
Low Voltage Directive 201 4/35/EU and
RoHS Directive 201 1 /65/EU.
The appropriate standards, technical regulations und specifications you can take from the
attached conformity declaration and the conformity declarations on our Website.
Perfektastr. 102 · A-1230 Vienna
Phone 0043 1 81 3 82 20 · Telefax 0043 1 81 5 99 54
http://www.auersignal.com · e-mail: offi[email protected]
Auer Signal GmbH
