11
GB
Daylight savings
Daylight savings
Start now?
Setup wizard
Time auto update
Update from DAB
Update from FM
Update from Network
No update
*
Set timezone
UTC+00:00:Dublin,Lon
UTC+00:30:
UTC+01:00:Madrid,Arr
UTC+01:30:
UTC+02:00:Athens,Ca...
Configuration
Connecting your radio to your computer network
1. Place your radio on a flat surface and straighten up the antenna.
2. Plug the AC power cord into an AC socket.
IMPORTANT:
The mains plug is used as the means of connecting the radio to the mains
supply. The mains socket used for the radio must remain accessible during normal use. In
order to disconnect the radio from the mains completely, the mains plug should be removed
from the mains socket outlet completely.
3. When you apply power, the display on the radio will light up and say: ‘netbox audisse’. The first
time that you use your radio (or after Factory Reset) the display will show ‘Setup wizard’ and
‘YES’ will be highlighted on the screen. Press the
Tuning Control Rotary
to start the setup
wizard. The screen will ask if you wish to run the setup wizard again at the next start up. This
will lead to the main menu.
4. A menu allowing you to specify the time auto update option for the clock will appear on the
display. The default of ‘Update from Network’ will be the best option for most users.
5. Rotate the
Tuning Control Rotary
to choose a time auto-update option for the clock. This can
be updated from DAB or FM radio, from the Network, or not updated. The default is to auto
update from the network. If you choose any other option, go to step 8. Otherwise you will first
need to select the correct time zone and daylight savings setting, see steps 6 and 7. If you
choose “No update” you will need to set the clock manually later (see the section of ‘Manually
setting the clock’). Press the
Tuning Control Rotary
to confirm your choice.
6. Rotate the
Tuning Control Rotary
to highlight the time zone which is applicable to your
location. Press the
Tuning Control Rotary
to enter the setting.
7. You will then need to set the Daylight Savings option according to your location (Daylight
Savings is also known as Summer/Winter time). Rotate the
Tuning Control Rotary
to
highlight “ON” to turn on daylight savings if required or “OFF” if you do not wish to use daylight
savings then press the
Tuning Control Rotary
to confirm the setting.
