1 •
2 •
3 •
4 •
5 •
6 •
LEFT SPEAKER
Amplifi er left channel (Left) power ouput. Connect speakers cables to this output according to indicated polarity. If you
use the amplifi er in MONO confi guration, take positive output from + Left terminal block.
LEFT PRE OUT (ABS connector)
Left channel (Left) preamplifi ed output to send to another amplifi er. The signal in this output is the LEFT PRE IN input
one.
LEFT PRE IN (ABS connector)
Amplifi er left channel (Left) input. The left preamplifi ed output of the source or of an external electronic crossover
must be connected to it.
RIGHT PRE IN (ABS connector)
Amplifi er right channel (Right) input. The right preamplifi ed output of the source or of an external electronic crossover
must be connected to it.
If you use the amplifi er in MONO confi guration, the signal must be connected to this input.
RIGHT PRE OUT (ABS connector)
Right channel (Right) preamplifi ed output to send to another amplifi er. The signal in this output is the RIGHT PRE IN
input one.
RIGHT SPEAKER
Amplifi er right channel (Right) power output. Connect speakers cables to this output according to indicated polarity. If
you use the amplifi er in MONO confi guration, take negative output from + Right terminal block.
Remark: ABS (Audison Balanced System) connector. If you want to use balanced lines, you need to employ the
special extension with ABS connector which you can fi nd in AUDISON CONNECTION catalogue.
- 10 -
INPUTS - OUTPUTS PANEL
OWNER’S MANUAL
1
Summary of Contents for Thesis HV venti
Page 1: ......