Audison bit one Advanced Manual Download Page 10

Page: 10 / 60

ADVANCED MANUAL / Bit One /

OUTPUT TO AN AMPLIFIERS SYSTEM PROVIDED WITH

ADLINK AND ACLINK CONNECTION (THESIS TH)

(

see section 8.4.7

)

OUTPUT TO A PRE PROVIDED AMPLIFIERS SYSTEM

(

see section 8.4.7

)

OUTPUT TO AN AMPLIFIERS SYSTEM PROVIDED WITH

AD LINK CONNECTIONS (THESIS TH) AMPLIFIERS

SYSTEM PROVIDED WITH PRE INPUT

(

see section 8.4.7

)

Remark:

in total, 8 output

channels are available.
The sum of the analog and
digital outputs (ADLink) must
not exceed the total available
channels.

ADLINK-OUT / ACLINK 2 - AMPS

5.6

OUTPUT SIGNALS

Remark:

the output channels

are 8 in total. The sum of the

channels of the amplifiers

connected must not exceed 8.

To increase the number of

channels, however, the same

function (AMP ID) can be

assigned to more than one

amplifier

AMPS

DRC

1 - AC Link - 2

DRC

ACLink

Function Control

ADLink

Digital Signal

Other

TH amplifier

amplifier

AMPS

DRC

1 - AC Link - 2

Other

amplifier

DRC

BIT ONE

Top Side

DRC

ACLink

Function Control

amplifier

Other

TH amplifier

ADLink

Summary of Contents for bit one





























































Search results

Summary of Contents for bit one

Reviews:

Related manuals for bit one

Brands by name

Popular brands

Audison bit one, Advanced Manual

Search results

Summary of Contents for bit one

Reviews:

Related manuals for bit one

Brands by name

Popular brands