34
OWNER’S MANUAL
APM /
B. Dummy Head Calibration.:
This function starts a Dummy Head calibration wizard. The procedure must be performed the first time the
device is used, or if the Dummy Head or the bit Tune are replaced.
1.
Connect the bit Tune to the PC.
2.
Connect the Dummy Head to the bit Tune.
3.
Turn on the bit Tune - Set the bit Tune function switch to PC ANALYZER.
4.
Start the bit Tune software by clicking on the icon on the PC Desktop and start the software in APM mode.
-
Click on the Settings menu and select Mic Calibration-> Dummy Head Calibration.
Manually enter the microphone calibration values, shown on the labels behind the Dummy Head. End the
calibration by clicking on OK.
C. Reset:
Selecting
Yes
the bit Tune default calibration values will be restored.
Le
ft E
ar
7
.0
00
m
V/
Pa
Re
ar
E
ar
7
.0
00
m
V/
Pa
Le
ft
E
ar
7
.000
m
V/
Pa
Re
ar
E
ar
7
.000
m
V/
Pa
6