20
OWNER’S MANUAL
APM /
6. APM / BIT TUNE DESKTOP
In order to use the main
APM
tools of the
bit Tune
you must install the software rev 2.1.2
(
see sect. 5
)
on your PC.
The bit Tune must be connected to the PC and be turned on by setting the measurement selection
switch
in the
PC
analyzer
position. Start the software by clicking the icon previously installed in your PC.
The first screen that appears is the starting screen, where you need to select one of the following modes:
- APM:
starts the APM measurement software
(Acoustic Performance Measurement)
;
- bit Tune
(see Audison bit Tune Advanced Manual)
;
- bit Tune + Processor:
bit Tune connected and interfaced to a processor
(see Audison bit Tune Advanced Manual)
;
- Rescue Mode:
firmware upgrade recovery
(see sect. 9.3, bit Tune manual)
.
For the first three measurement modes the software can also be started in
OFF LINE
mode.
To select the starting mode, go to the drop-down menu, select the entry
APM
using the mouse.
6