30
OWNER’S MANUAL
APM /
1. MODE:
Selection of “
Free
” or “
Competition
” modes.
-
In
Free
mode the use of all existing audio systems is contemplated.
-
In
Competition
mode only the use of Audison/Hertz Pprocessors/DSP
is contemplated.
3. LOAD MEASUREMENT:
To upload a previously saved
*.apm
file. This can be loaded in
offline, to view the results, or uploaded and then overwritten
with a subsequent measurement. If the user is working on
a measurement that has not yet been terminated and/or has
not yet been saved and/or changes from the previously saved
version, the SW reminds the user to save to avoid data loss.
4. SAVE MEASUREMENT:
It saves a
*.apm
file in the PC. The default destination folder
is:
“APM_data ->Measurements”
and is created under the
Documents folder in the PC.
5. SAVE MEASUREMENT AS:
It saves a
*.apm
file in the PC and allows the
modification of the name and/or the destination folder.
6. CREATE REPORT:
It creates the report of the current measurement.
If a complete measurement is loaded, the report will show all the
parameters (user data, results) it contains.
2. NEW MEASUREMENT:
It creates a new file
“APM_session xy_measurement_xy.apm”
where:
“APM_session_xy_”
is the suffix (default name) of the session added to the measure
“measurement_xy”
, and saved with the extention
“.apm”
. The measurement
index xy is progressive. Every time a new measurement is launched, the SW cleans
the results, asking whether to clean or not and the user data, if previously written
(alert box with check). If the user is working on a measurement that has not
yet been terminated and/or has not yet been saved and/or changes from the
previously saved version, the SW reminds the user to save to avoid data loss.
1
2
3
4
6
7
8
9
5
5
6.2.5
“APM” MAIN MENU
6