![Audiovox VME9020TS Manual & Warranty Download Page 67](http://html1.mh-extra.com/html/audiovox/vme9020ts/vme9020ts_manual-and-warranty_3013864067.webp)
67
TV TUNER OPERATION
Accessing TV Mode
To switch to TV mode, press the
TV
button (16) on the front panel or press the
SRC
but-
ton (8) on the remote control until TV appears at the bottom of the screen.
NOTE: Touch the top left corner to access the MAIN MENU Multi-ZONE
SETUP menu and the top right corner to access the Multi-ZONE menu
(rear zone setup).
Auto Tuning
Press the
button (19) on remote control, or the
button on the joystick (9) to seek
the next available TV station by increasing the tuning frequency.
Press the
button (17) on the remote control, or the
button on the joystick (8) to
seek the next available TV station by decreasing the tuning frequency.
Press the
/
BAND
,
,
,
or
button to stop searching.
Once a TV station is searched, the auto seeking stops and the TV station is played. If
no station is searched, the tuning stops at the first channel after performing a round
search.
Manual Tuning
Press and hold the
or
buttons (8, 9) on the joystick to increase or decrease the TV
frequency one step.
Storing Stations (AS)
Automatic Preset Memory
To select the strong stations in the current TV frequency range, press and hold the joy-
stick button (5) to activate the Auto Store function. The new stations replace stations
already stored. Press the joystick button again or press the
/
BAND
button (20) on
the remote control to stop searching.