36
Switch to Radio Tuner source
Press the
TUNER
button (10) on the front panel or the SRC button on the remote con-
trol (8) to switch to the TUNER source.
Select FM/AM Band
Touch the
BAND
button (16) on the screen, or press the
TUNER
button (10) on the
unit or the
BAND
button on the remote control (20) to change between the following
bands: FM1, FM2, FM3, AM1 and AM2.
Auto Tuning
Press and hold the
button (19) on remote control or screen, or the
button on the
joystick (9) to seek the next available radio station by increasing the tuning frequency.
Press the button again to stop searching.
Press and hold the
button (17) on the remote control or screen, or the
button on
the joystick (8) to seek the next available radio station by decreasing the tuning frequen-
cy. Press the button again to stop searching.
Manual Tuning
Press the
or II
buttons (14, 22) on the remote control or screen, or the
or
buttons (6, 7) on the joystick to increase or decrease the tuning frequency one step.
Press and hold
the buttons to continuously tune until you release them.
Using Preset Stations
Six numbered preset buttons store and recall stations for each band. All six stored sta-
tions (P1-P6) for the current band appear on the screen.
Storing a Station
1. Select a band (if needed), then select a station.
2. Touch and hold an on-screen preset button (6) for three seconds. The preset number
appears at the top of the display.
