32
Table 7: ASP Config Menu Features
Exiting the System Setup Menu
To exit setup mode and resume normal playback, press the
SYS SETUP
button (31) on
the remote control or the
DISP
button (13) on the front panel.
Setting
Bass Center
Freq
Treble Center
Freq
Sub.W Filter
Sub.W Phase
Bass Q-Factor
BACK
Options
60Hz
80 Hz
100Hz
130Hz
150Hz
200Hz
10KHz
12.5KHz
15KHz
17KHz
80Hz
120Hz
160Hz
OD
180D
1.0
1.25
1.5
2.0
Function
According to the audio source, select the Bass Center
Frequency to achieve the best Bass effect.
According to the audio source, select the Bass Center
Frequency to achieve the best Treble effect.
Selecting a crossover frequency sets a cut-off frequency
of the subwoofer´s LPF (low-pass filter) and the “SMALL”
speakers`HPF (high-pass filter). The Crossover frequency
setting has no effect if the subwoofer is set to “OFF” and
any other speaker is set to “LARGE”.
Subwoofer output IN phase
Subwoofer output OUT OF phase
Note: Depending on your installation, reversing the sub-
woofer phase may increase Bass output.
When the Bass Center Frequency is selected, adjusting
the Bass Q-Factor alters the sharpness of the Bass out-
put.
Return to previous menu.
