Audiovox SCO1, Owner'S Manual And Installation Instructions, Page: 8 / 16

8
11. Reposition heating pad onto cushion foam. Make sure the thermostat is in the
correct location. Refer to Step 9. Using the supplied double sided tape, attach
the back edge of the heating pad to the cushion foam. With the pad attached
at the rear, determine the final length.
NOTE: Make sure that the length difference between the cushion pad and back rest
pad is not more than 10-3/4 inches (275 mm). Refer to Figure 7.
Figure 7
12. Trim if needed.
NOTE: The seat heater pad should reach the forward edge of the seat cushion.
Refer to Figure 8.
Figure 8