7
9. Once the area that needs to be cut out is marked, remove the heating pad
from the cushion. Measure in (towards Center of pad) on each side 1
9
/
16
inch
(40mm) and mark. This is necessary to ensure that the main power supply for
the heating pad does not get damaged or cut. Refer to Figure 5.
Figure 5
10. Cut out the marked area. With the section removed, wrap the lateral “bridges”
with the black insulation tape. Repeat procedure on remaining sides of the
cut out. Refer to Figure 6.
Figure 6
1
9
/
16
I
nch
40mm
1
9
/
16
I
nch
40mm