background image

-13-

!

Remove the batteries from the transceiver if it is not expected to be
used for long periods. This will eliminate the possibility of battery acid
leaking from the batteries and corroding the transceiver.

!

Avoid exposing the unit to water or extremes of temperature.

!

Do not use this device in or near a mining facility, which uses
remotely triggered explosives or in areas labeled “Blasting Area”.
Premature or accidental detonation may result.

!

Do not attempt to modify or in any way increase the output of this
transceiver. Its output is designed to meet the legal limits set by the
FCC.

!

Do not use this device or change its batteries in potentially explosive
atmospheres as sparks in such areas could result in an explosion.

!

Turn your transceiver off wherever posted notices restrict the use of
radios or cellular telephones. Facilities such as hospitals may use
equipment that is sensitive to RF energy.

!

Turn your transceiver off on-board aircraft when requested to do so.

!

  

Do not place your transceiver in front of a vehicle’s air-bag. If the air bag

deploys, it could propel the transceiver like a projectile.

!

This transceiver complies with FCC regulations for use in the United
States. Use in other countries may be prohibited or restricted by local
regulation. Please check with the local regulating agency before using
this device outside of the United States.

 

WARNING

Summary of Contents for FRS-WP1

















Reviews: