background image

WARNING:

 TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT

EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

The exclamation point within the triangle is a warning sign

alerting you of important instructions accompanying the product.

The lightning flash and arrowhead within the triangle is a warning

sign alerting you of "dangerous voltage" inside the product.

WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE
COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL.

WARNING

RISK OF ELECTRIC SHOCK

DO NOT OPEN

LOCATION OF CONTROLS

HOW TO SET THE CLOCK

Connect the AC power cord to a wall outlet. Figures will appear and

begin to flicker on the time display.

Be sure to install an optional 9V battery (6F22) for the power back-up

function. If the AC power supply is interrupted, the battery supplies

power to keep the clock operating and holding the alarm time setting.

• During power interruption, the backup battery will keep track of

the time and store the alarm setting until the power returns. The

battery will not operate the LED clock display, radio, CD player, or

alarm function.

• After a power interruption, the displayed time may not be always

correct (it may gain or lose less than ten minutes per hour).

When to replace the battery

To check the battery condition, unplug the AC power cord from the

wall outlet and plug it in again after a few minutes. If the displayed

time is incorrect, replace the battery with a new one.

Caution

• Clock display will be flash as the indication of the system has lost AC

power some moment (even backup battery inserted), please double

check the clock and update.

• Be sure to install the battery before disconnecting the AC power

cord.

• When the unit is left unplugged for a long time, remove the battery

to avoid undue battery discharge and unit damage from battery

leakage.

INSTRUCTION

MANUAL

LISTENING TO THE RADIO

1.

 Slide the ALARM/POWER switch to ON.

2.

 Select the FUNCTION switch to FM or AM.

3.

 Tune in to a station.

4.

 Adjust the volume.

5.

 After listening. Set the ALARM/POWER switch to STANDBY.

To improve the radio reception

FM:

 Extend the external FM

antenna wire.

Caution:

 DO NOT CONNECT

TO OUTSIDE ANTENNA.

For private listening

Connect headphones (Ø3.5mm stereo mini plug) to the PHONES jack.

When the headphones are connected, speakers are automatically

disconnected.

PRECAUTIONS

POWER SUPPLY

USING HOUSE CURRENT

Before use, check that the rated voltage of your unit matches your

local voltage.

CAUTION:

 To prevent

electrical shock, match

wide blade of plug to

wide slot, fully insert.

POWER BACK UP

DURING POWER

INTERRUPTION

Insert one "6F22" battery

* DO NOT CONNECT FM ANTENNA TO EXTERNAL ANTENNA *

* SEE BOTTOM OF UNIT FOR GRAPHIC SYMBOLS *

CAUTION

INVISIBLE LASER RADIATION WHEN
OPEN AND INTERLOCKS DEFEATED.

AVOID EXPOSURE TO BEAM

WARNING:

DO NOT PLACE THE UNIT ON BEDDING

OR OTHER SURFACES THAT PREVENTS

AIR  FLOW THROUGH THE UNIT.

This product contains a low

power laser device

TIME DISPLAY INDICATOR/CD DISPLAY

FCC Information

This device complies with Part 15 of FCC Rules. Operations are subject

to the following two conditions: (1) this device may not cause harmful

interference, and (2) this device must accept any interference received,

including interference that may cause undesirable operation.

• To disconnect the cord, pull it out by the grasping plug. Never pull it by

the cord.

• Avoid exposure to temperature extremes, direct sunlight, moisture, sand,

dust or mechanical shock.

Allow adequate air circulation to prevent internal heat build-up. Do

not place the unit on surfaces (rugs, blankets, etc.) or near materials

(curtains, draperies) that may block the ventilation holes.

• Should any solid object or liquid fall into the unit, unplug the unit and

have it checked by qualified personnel before operating it any further.

• When cleaning the casing, use a soft cloth dampened with a mild

detergent solution. Never use abrasive cleaners or chemical solvents.

AM:

 Rotate the unit horizontally.

AC cord to

AC outlet

CLASS 1 LASER

PRODUCT

ALARM CLOCK
AM/FM RADIO
WITH CD PLAYER

HOUR digits

PM 

indicator

ALARM 1

 indicator

ALARM 2 

indicator

MINUTE digits

TRACK No./PLAY indicator

REPEAT ONE indicator (r 1)/

REPEAT ALL indicator (r A)

1.

ALARM 1 / ALARM 2 buttons

2.

SLEEP button

3.

SKIP   / HOUR button

4.

REPEAT button

5.

SKIP   / MIN button

6.

STOP   / CLOCK SET button

7.

PLAY / PAUSE   button

8.

VOLUME control

9.

ALARM / POWER switch

(CD / RADIO / BUZZER) /

STANDBY/ON

10.

FUNCTION switch (AM/FM/CD)

11.

PHONES jack

12.

9V Back-up battery compartment

13.

Display

14.

Speaker

15.

Dial Scale

16.

TUNING control

17.

AC cord

18.

CD door

19.

SNOOZE button

1.

Pressing the CLOCK SET button when clock display will be flash,

press the HOUR   button to the desired hour.

2.

Press the MIN   button to the desired minute.

3.

Pressing the CLOCK SET button

Note: When the POWER switch to ON and the FUNCTION switch to

CD mode, the clock will not setting.

• 

PM 12:00 = NOON time, and PM indicator will light up.

8

1

9

2

10

4

3

11

12

5
6
7

17

18

19

13

14

15
16

Reviews: