1.
Antenna Aiming Display.
Upon entering this mode, two vertical bar graphs are displayed representing terrestrial
(tower) and satellite transmitters. The signal strength is displayed by the respective graph
segments. Position the antenna to optimize either the satellite or terrestrial signal. The
current setting is indicated by the number of bars in the graph. Moving the antenna location
should maximize the number of bars in the respective graph, thus ensuring optimum
reception. To exit this function, press the exit Button.
Figure 14. Antenna Aiming Display
Note:
Terrestrial repeaters are typically used in large urban areas where structures may
affect the line of sight satellite signal. Terrestrial signals may not be available in
your geographic location.
2.
Tune Select Display
Upon entering this mode, you may clear all 30 memory locations (erase all), or just specific
memory locations (erase some) can be cleared. The following adjustment options are
possible:
Figure 15. Tune Select Display
a. Clear all Memory Locations
. Press the Erase All button; a prompt display screen
appears confirming
Please Confirm Your Selection?
Press the
Yes
or
No
button as
desired.
17
