CD CH
CD CH
CD CH
CD CH
CD CH A
A
A
A
A NGER ERR
NGER ERR
NGER ERR
NGER ERR
NGER ERROR CODES
OR CODES
OR CODES
OR CODES
OR CODES
If a problem should develop while operating the CD changer, the following error codes
may appear on the display panel:
ER-1: Indicates that there is no magazine loaded in the CD changer.
ER-2: Indicates a problem with the magazine eject function.
ER-3: Indicates an error in the disc loading function.
ER-4: Indicates an error in the disc un-loading function.
ER-5: Indicates an error in the magazine position.
ER-6: Indicates an error in the laser pick-up position.
ER-7: Indicates an error in the laser focus on the disc.
In any of the above situations, try ejecting the CD magazine from the changer and
make sure the discs are clean, undamaged, and loaded correctly(refer to the Owner’s
Manual of the CD changer). Re-load the magazine and check for proper operation.
You may also try activating the RESET button
bt
on the unit, but this will also erase the
time and pre-set memories.
If the suggested measures do not solve the problem, contact an approved warranty sta-
tion near you for further assistance.
CD CH
A
NGER ERR
OR CODES
11
11
11
11
11
