SAFETY INSTRUCTIONS
Please, read carefully these safety instructions.
1. Save this User Manual for future reference.
2. The equipment must be connected to a bipolar power cut-off switch according to the
low voltage regulation and must be accessible for disconnection.
3. The equipment should not be exposed to water or splashing and objects filled with
liquids should not be placed on the equipment. Do not use liquid or spray detergent for
cleaning. Do not expose this equipment to humid areas.
4. No flame sources, such as lighted candles, should be placed on the equipment.
5. Install this equipment on a safe surface. If you do not place the equipment on a safe
surface, it may fall and be damaged.
6. Enclosure grills serve for ventilation. DO NOT COVER THE GRILLS. Leave 5 cm on
each side for proper ventilation.
7. The equipment should only be opened by qualified or trained personnel.
8. The equipment must be connected to an outlet with protective earthing.
9. Pay attention to the connection polarity when operating the equipment with a direct
current (DC) power source. The reversed polarity connection can cause damage to the
equipment, or to the power supply.
10. If any of these situations originates, let technical staff check the equipment:
a) The power cord or plug is damaged.
b) Liquid has infiltrated inside the equipment.
c) The equipment has been exposed to moisture.
d) The equipment has not worked well or does not get it working following the
instruction manual.
e) The equipment has been dropped and damaged.
f) If the equipment has obvious signs of damage.
11. The wiring must be carried out only by trained personnel. Disconnect the audio
inputs and outputs while making connections or disconnect the equipment from the power
supply. Be sure to use the proper cables to make the connections.
1