26
Fig. 3:
Connection of the amplifier to the head unit / car radio via PP-ISO cable
1
The ISO female connector will either be plugged into the vehicle harness that has been discon-
nected from the car radio or a car-specific adaptor.
2
The ISO male connector will either be plugged into the head unit / car radio or into a car-specific
adaptor.
3
The 20-pole connector will be plugged into the MATCH UP 7DSP amplifier.
4
Optional:
car-specific adaptor – such an adaptor may be required if the ISO connectors of the
PP-ISO cable harness does not fit into your head unit / car radio.
5
Important:
separate the cable joints of the power supply lines of the PP-ISO cable harness (yellow
and black). After separating the cable joints the open wire ends have to be properly insulated with
tape or other appropriate material.
6
The power supply terminal has to be connected directly to the battery - use only adequate cables
(cable cross section: min. 10 mm² / AWG 8) and the positive cable should be provided with a main
fuse at a distance of max. 30 cm from the battery
Important:
Never use the PP-ISO cable for the power supply of the UP 7DSP!
Male and female
connector for original
cable harness or
car-specific adaptor
Female
connector for
original cable
harness
1
2
3
4
6
5
Installation with PP-ISO cable
