13
Connectors and control units
1
Input Sensitivity
Control for adjusting the input sensitivity of
the
Line
and
Highlevel Input
.
2
X-Over Frequency
Control for adjusting the highpass resp. low-
pass filter (depending on the position of the
X-Over
switch) from 15 to 150 Hz.
3
Line Input
3.5 mm stereo pre-amp input for connecting
pre-amplifier signals.
4
Highlevel Input
Highlevel speaker inputs for connecting a
factory radio or an aftermarket radio without
pre-amp / line outputs.
5
X-Over
Switch for selecting the appropriate filter.
6
Speaker Output
Speaker outputs for connecting speaker
systems.
7
Input Mode
Switch to route input signals to the respective
amplifier channels.
8
Status LED
This LED indicates the operating mode of the
amplifier.
9
+12 V
Connector for the +12 V power cable
of the positive terminal of the battery.
10
GND
Connector for the ground cable (negative
terminal of the battery or metal body of the
vehicle).
11
REM
Connector for the remote cable.
12
Auto Remote
This switch allows to activate / deactivate the
automatic turn-on feature via the highlevel
inputs of the amplifier.
1
3
5
2
4
12
8
9
7
6
10 11
