12
Connectors and control units
11
Speaker Output
Speaker outputs for connecting subwoofers.
12
Power & Protect LED
This LED indicates the operating mode of the
amplifier.
13
Fuse
Input fuses - 2 x 30 Ampere.
14
+12 V
Connector for the +12 V power cable of the
positive terminal of the battery.
15
REM
Connector for the remote cable.
16
GND
Connector for the ground cable (negative
terminal of the battery or metal body of the
vehicle).
1
Line Input
RCA inputs for connecting lowlevel line
signals.
2
Highlevel Input
Highlevel speaker inputs for connecting a
factory radio or an aftermarket radio without
lowlevel line outputs.
. 3
Level Input
Control for adjusting the input sensitivity of
the lowlevel
Line
and
Highlevel Inputs
.
4
Phase Shift
Control for adjusting the phase from 0° to
180°.
5
Bass Boost
Control for adjusting the bass boost from 0 to
12 dB.
6
Subsonic
Control for adjusting the subsonic filter from
10 to 50 Hz.
7
Remote
Input for connecting the included cable
remote control for volume adjustment.
8
LPF
Control for adjusting the lowpass filter from
50 to 250 Hz.
9
Master / Slave Mode
Switch for operating two D ONE amplifiers in
bridge mode.
10
Mono RCA/Cinch In-/Output
Mono RCA/Cinch signal in- or output for
bridge mode operation in
Master / Slave
Mode
.
11
12
15
13
14
16
1
2
5
7
8
9
3
4
6
10
