Page 30
LIVEtouch20
- 20 Channel Digital Mixing Console
English
5 - Fader group selection buttons
Each button corresponds to a group of eight faders, which corresponds to the eight physical faders on the
console.
6 - RTA
With the RTA measurement function, your device can detect the frequency response of the room and try to correct
it automatically.
You can use either the device's internal oscillator or an external pink noise source. You also need a high quality
measuring microphone, it must be connected to one of the 12 MIC input channels.
Measurement microphones usually require phantom power, so be sure to turn on the 48V power of the selected
channel and increase the gain until you get a proper signal.
Now go to the departures section and send your channel to one of the 4 Bus5 to Bus8 stereo buses. Also disable
sending to L&R.
