manualshive.com logo in svg

audiophony LIVEtouch20, User Manual

Share
Download
audiophony LIVEtouch20 User Manual Download Page 16

Page  16

LIVEtouch20

 - 20 Channel Digital Mixing Console

English

4-1-9 Parametric equalizer sub-page

This page is the same as for MIC channels. All settings will be applied to both channels of the stereo signal.

For ST1 and ST2, this page is the same as for MIC channels, with all settings applied to both channels of the stereo signal. 
For S/PDIF and USB channels, there is no dynamic section.

For ST1 and ST2, this page is the same as for the MIC channel. For S/PDIF and USB Sending channels is limited to 5-8 
stereo and Master LR buses. For mono buses, the sum on both sides of the stereo channel is actually sent to the bus. For 
stereo and Master LR buses, a scale replaces the Panning : the center (50|50) of the BAL will send the left and right parts 
of the stereo channel to the corresponding left and right parts of the Bus. Any other setting will attenuate one side of the 
stereo channel, for example (100|0) only sends the left side of the stereo channel to the left side of the bus, the right side 
being muted.

4-1-10 Dynamics sub-page

4-1-11 Bus Send sub-page

Summary of Contents for LIVEtouch20









































Reviews:

No comments

Brands by name

Popular brands

Load more brands