Page
17
DZONE88
- Digital array, 8 inputs 8 outputs
English
6-9 Output equalisation
Double-click on the
button.
This section works like the equalisation section described in paragraph 5.5.
6-10 Output delay
Double-click on the
button.
For each output, you can set a different delay.
Delays can be displayed in feet (ft), cm or
milliseconds (ms).
To enable the delay on an output channel, click
on the red button to change it to green.
The circular arrow resets the delay to zero.
6-11 Output compressor
Double-click on the
button.
This section works like the compressor section described in paragraph 5.6.
6-12 Output limiter
Double-click on the
button.
The window opposite shows the settings
available for the limiter.
Once the function is active, you can graphically
move the curve to modify the threshold value.
